Air cooled milling
1-10 of 400 results
Jadeshay
DC6-12V 1000kV High Voltage Generator, Super Electric Arc Module
£9.09- The module can output high voltage pulse current, small size and high efficiency.
- This module is the finished module of transformer for small scientific production.
Wansupyin
2023 1x Non-Contact LCD Electric Test Pen Voltage Digital Detector Tester
£10.29- Brand new and high quality
- Made of high quality material, durable and practical to use
Moudoauer
12~1000V AC Non-Contact LCD Electric Test Pen Voltage Digital Detector Tester Spare Part Accessory
£10.63- Brand new and high quality
- Made of high quality material, durable and practical to use
Gancon
Gancon LCD Display 0.5‑30V 4A DC‑DC Buck‑Boost Converter Module CC‑CV Voltage Regulator
£12.29- The structure of this product provides a variety of software protection mechanisms that are safer, more reliable and practical.
- Large heat dissipation area and can better maintain long‑term operation.
Greenlee
Greenlee PTS100/200 RJ11 Tone Generator and Probe Kit Pair Tracing System with RJ11 Socket
£137.87- Fast, accurate wire identification
- Sends tone to identify wires
Power Probe 4pcs/set Probe Pens LED BDM Frame Pins with Connect Cable Replacement for KTAG/KESS ECU Board Measuring tool
£50.51- --Checking for Bad Ground Contacts and Locating Short Circuits
- --The test lamp checks fuses, switches, armatures, distributors and circuits to quickly and easily locate short circuits and open circuits;
Power Probe LED Frame with Mesh 4 Probe Pens Measuring tool
£63.08- --This electronic test leads kit are designed for almost all electrical and electronic applications.
- --It will help you connect for a wide range of multimeters, electronics, and vehicles. They are designed for you to replace your bad digital multimeter probe.
Power Probe For100 LED ECU Programmer Full Set Frame With 4Pcs Probe Pens Measuring tool
£68.79 (£68.79 / Count)- --Checking for Bad Ground Contacts and Locating Short Circuits
- --The test lamp checks fuses, switches, armatures, distributors and circuits to quickly and easily locate short circuits and open circuits;
Power Probe 5pcs/Lot 1.0mm Probe and 1.5/2.0mm Milling Cutter for 2M2 Magic Tank Automatic Car Key Cutting machine Measuring tool (Color : 1.0mm probe)
£81.87- --This electronic test leads kit are designed for almost all electrical and electronic applications.
- --It will help you connect for a wide range of multimeters, electronics, and vehicles. They are designed for you to replace your bad digital multimeter probe.
Power Probe 22pcs/Lot Frame ECU Adapters KT M Dimsport Probe Adapters Full Set Measuring tool
£81.87- --This electronic test leads kit are designed for almost all electrical and electronic applications.
- --It will help you connect for a wide range of multimeters, electronics, and vehicles. They are designed for you to replace your bad digital multimeter probe.
Ywbl-wh
20° Gear Cutter, 8Pcs Gear Cutter, High Speed Steel Cutting Tool Industrial Supplies M1.5 20 5mm 6mm for Milling Gears, Square Nose End Mills
£89.42- There are a total of 8 sets of gear cutting tools to suit different numbers of teeth.
- This gear milling cutter is a special cutting tool specially designed for milling gears. Can be used with peace of mind
No Brand
1pcs 100 * 0.5 * 40Z HSS Battery Special for Plate Cutting Gear Cutters
£7.90- Outside Dia: 100mm
- Inner Bore: 25mm
Sourcing Map
sourcing map 63Pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Motor Robot Various Gear Axle Belt Bushings
£9.49- The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy robots/motors.
- Multi-uses, you can use it to fix the broken part,Great for diy science and small production, product design and mechanical model.
Agatige
8PCS Involute Gear Milling Cutter Set, Milling Cutter Gear Cutting Tools, Inside Bore Diameter 22mm Gear Cutting
£74.29- Superior material: It is made of high-speed steel material, with high hardness, rust-proof and not easy to oxidize, strong and durable, and long service life.
- Special tools: Gear milling cutters are specially designed for tooth milling. Milling cutters can adapt to different numbers of teeth, basically meeting your needs.
Wanromjun
8Pcs Involute Gear Cutters Set, High Speed Steel Cutting Tools, 14.5 Pressure Angle, Milling Machine High Speed Steel Disk-Shaped (14.5° 55mm 22mm)
£84.29- Material: Using high speed steel materials, strong and durable, has a long service life
- Specification: The outer diameter is 55mm, the inner diameter is 22mm and the pressure angle is 14.5°
Kelfeeao
Involute Gear Milling Cutter High Speed Steel Fine Punching, Milling Cutter Gear Cutting Tools with Large Cut out Design
£20.59- High Hardness: High temperature quenching heat treatment strengthens the overall hardness, making it more comfortable to use.
- Smooth Installation: The milling cutter is integrally formed without burrs, has smooth surfaces, smooth installation and easy installation.
Agatige
2Pcs Milling Cutter, Tungsten Steel 4 Flutes CNC Router Bits Woodworking Cutting Tools 4 x 75 x 4T
£10.69- Excellent Performance: The flat-bottom milling cutter adopts ultra-fine grained cemented carbide material, which has good milling and cutting performance.
- Efficient: The cutting edge is sharping and the surface is free of burrs, the ultra‑fine cemented carbide material can ensure its engraving and milling performance.
Hhip
HHIP 2041-2051 20P #5 14.5 Degree Gear Cutter
£32.75- Cutter diameter is 2-3/8"; Arbor hole is 1"
- For spur gears with 14.5 degrees & 20 degrees
Hhip
HHIP 2041-4883 48P #8 14.5 Degree Gear Cutter
£27.60- Cutter diameter is 1-3/4"; Arbor hole is 7/8"
- For spur gears with 14.5 degrees & 20 degrees
Wekow
WEKOW 1pcs Module 1.25 PA20#1-8 HSS Bore 22mm Involute Gear Milling Cutter (#5)
£22.68- M1.25 HSS gear milling cutter.
- Specialty cutting tools designed for milling gears.
Ywbl-wh
20° Gear Cutter, 8Pcs Gear Cutter, High Speed Steel Cutting Tool Industrial Supplies M1.5 20 5mm 6mm for Milling Gears, Square Nose End Mills
£89.42- There are a total of 8 sets of gear cutting tools to suit different numbers of teeth.
- This gear milling cutter is a special cutting tool specially designed for milling gears. Can be used with peace of mind
No Brand
1pcs 100 * 0.5 * 40Z HSS Battery Special for Plate Cutting Gear Cutters
£7.90- Outside Dia: 100mm
- Inner Bore: 25mm
Sourcing Map
sourcing map 63Pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Motor Robot Various Gear Axle Belt Bushings
£9.49- The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy robots/motors.
- Multi-uses, you can use it to fix the broken part,Great for diy science and small production, product design and mechanical model.
Agatige
8PCS Involute Gear Milling Cutter Set, Milling Cutter Gear Cutting Tools, Inside Bore Diameter 22mm Gear Cutting
£74.29- Superior material: It is made of high-speed steel material, with high hardness, rust-proof and not easy to oxidize, strong and durable, and long service life.
- Special tools: Gear milling cutters are specially designed for tooth milling. Milling cutters can adapt to different numbers of teeth, basically meeting your needs.
Wanromjun
8Pcs Involute Gear Cutters Set, High Speed Steel Cutting Tools, 14.5 Pressure Angle, Milling Machine High Speed Steel Disk-Shaped (14.5° 55mm 22mm)
£84.29- Material: Using high speed steel materials, strong and durable, has a long service life
- Specification: The outer diameter is 55mm, the inner diameter is 22mm and the pressure angle is 14.5°
Kelfeeao
Involute Gear Milling Cutter High Speed Steel Fine Punching, Milling Cutter Gear Cutting Tools with Large Cut out Design
£20.59- High Hardness: High temperature quenching heat treatment strengthens the overall hardness, making it more comfortable to use.
- Smooth Installation: The milling cutter is integrally formed without burrs, has smooth surfaces, smooth installation and easy installation.
Agatige
2Pcs Milling Cutter, Tungsten Steel 4 Flutes CNC Router Bits Woodworking Cutting Tools 4 x 75 x 4T
£10.69- Excellent Performance: The flat-bottom milling cutter adopts ultra-fine grained cemented carbide material, which has good milling and cutting performance.
- Efficient: The cutting edge is sharping and the surface is free of burrs, the ultra‑fine cemented carbide material can ensure its engraving and milling performance.
Hhip
HHIP 2041-2051 20P #5 14.5 Degree Gear Cutter
£32.75- Cutter diameter is 2-3/8"; Arbor hole is 1"
- For spur gears with 14.5 degrees & 20 degrees
Hhip
HHIP 2041-4883 48P #8 14.5 Degree Gear Cutter
£27.60- Cutter diameter is 1-3/4"; Arbor hole is 7/8"
- For spur gears with 14.5 degrees & 20 degrees
Wekow
WEKOW 1pcs Module 1.25 PA20#1-8 HSS Bore 22mm Involute Gear Milling Cutter (#5)
£22.68- M1.25 HSS gear milling cutter.
- Specialty cutting tools designed for milling gears.
Ywbl-wh
20° Gear Cutter, 8Pcs Gear Cutter, High Speed Steel Cutting Tool Industrial Supplies M1.5 20 5mm 6mm for Milling Gears, Square Nose End Mills
£89.42- There are a total of 8 sets of gear cutting tools to suit different numbers of teeth.
- This gear milling cutter is a special cutting tool specially designed for milling gears. Can be used with peace of mind
No Brand
1pcs 100 * 0.5 * 40Z HSS Battery Special for Plate Cutting Gear Cutters
£7.90- Outside Dia: 100mm
- Inner Bore: 25mm
Sourcing Map
sourcing map 63Pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Motor Robot Various Gear Axle Belt Bushings
£9.49- The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy robots/motors.
- Multi-uses, you can use it to fix the broken part,Great for diy science and small production, product design and mechanical model.
Agatige
8PCS Involute Gear Milling Cutter Set, Milling Cutter Gear Cutting Tools, Inside Bore Diameter 22mm Gear Cutting
£74.29- Superior material: It is made of high-speed steel material, with high hardness, rust-proof and not easy to oxidize, strong and durable, and long service life.
- Special tools: Gear milling cutters are specially designed for tooth milling. Milling cutters can adapt to different numbers of teeth, basically meeting your needs.
Wanromjun
8Pcs Involute Gear Cutters Set, High Speed Steel Cutting Tools, 14.5 Pressure Angle, Milling Machine High Speed Steel Disk-Shaped (14.5° 55mm 22mm)
£84.29- Material: Using high speed steel materials, strong and durable, has a long service life
- Specification: The outer diameter is 55mm, the inner diameter is 22mm and the pressure angle is 14.5°
Kelfeeao
Involute Gear Milling Cutter High Speed Steel Fine Punching, Milling Cutter Gear Cutting Tools with Large Cut out Design
£20.59- High Hardness: High temperature quenching heat treatment strengthens the overall hardness, making it more comfortable to use.
- Smooth Installation: The milling cutter is integrally formed without burrs, has smooth surfaces, smooth installation and easy installation.
Agatige
2Pcs Milling Cutter, Tungsten Steel 4 Flutes CNC Router Bits Woodworking Cutting Tools 4 x 75 x 4T
£10.69- Excellent Performance: The flat-bottom milling cutter adopts ultra-fine grained cemented carbide material, which has good milling and cutting performance.
- Efficient: The cutting edge is sharping and the surface is free of burrs, the ultra‑fine cemented carbide material can ensure its engraving and milling performance.
Hhip
HHIP 2041-2051 20P #5 14.5 Degree Gear Cutter
£32.75- Cutter diameter is 2-3/8"; Arbor hole is 1"
- For spur gears with 14.5 degrees & 20 degrees
Hhip
HHIP 2041-4883 48P #8 14.5 Degree Gear Cutter
£27.60- Cutter diameter is 1-3/4"; Arbor hole is 7/8"
- For spur gears with 14.5 degrees & 20 degrees
Wekow
WEKOW 1pcs Module 1.25 PA20#1-8 HSS Bore 22mm Involute Gear Milling Cutter (#5)
£22.68- M1.25 HSS gear milling cutter.
- Specialty cutting tools designed for milling gears.