Big bore cylinder
1-6 of 240 results
Kakake
Wind Back Calliper Adaptor, Carbon Steel 3/8in Disc Brake Piston Spreader High Strength Easy To Use Universal Practical for Most Cars
£6.39- Size: The dimension of the brake piston remover tool is 1 x 1 x 1 in, and the medium flight is 0.4in. And it has 6 different surfaces for different purposes.
- Brake Piston Remover for Most Car: Use with 3/8in drive ratchet and extension rod, brake piston remover can fit rear disc brake piston on most cars and light pickup trucks.
Milisten
Milisten Butterfly Brake Pad Repair Tools Brake Accessory Sturdy Brake Pad Spreader Small Brake Pad Tool Professional Brake Piston Tool Brake Pad Tools Metal To Rotate Compression Fastener
£10.70- Disc brake pad spreader-- the swivel-designed brake caliper compression tool features a large contact surface.
- Brake pad tools-- it is a compact and portable tool that can be easily stored in your toolbox or trunk, making it easy to take with you wherever you go.
Yctze
Disc Brake Piston Spreader Rewind Tool Kit 5pcs/set, Wider Application Range, Premium Chrome-Vanadium Steel, Rust-Proof, Lightweight, Universal Use
£14.17- [STYLISH AND RUSTPROOF] - The surface of the tool is electroplated, giving it a stylish and generous appearance. It is also effectively rustproof, ensuring long-lasting performance.
- [PRECISE MACHINING] - The disc brake piston spreader tool features precise machining and smooth threading. It has 4 teeth on both sides of the chuck, allowing for a wider application range.
Generic
Abs Wheel Pace Sensor 479118j000 Alternative for Altima 2002-2006 Accessory-car Accessary
£4.20- Solid characteristics, expert performance.
- Substitute component variety ssb500090, directly update the old or broken one.
Supvox
SUPVOX Butterfly Brake Pad Professional Brake Piston Tool Brake Pad Piston Tool Swivel Brake Pad Tool Brake Accessory Tools Swivel Brake Pad Spreader Metal Pump Compression To Rotate
£9.59- Disc brake piston tool: the brake pad spreader is a durable and long-lasting tool that is built to withstand the rigors of regular use.
- Brake supply: making it easy to replace brake pads and ensure that your car is safe to drive.
Generic
Carbon Steel Car Rear Disc Brake Piston Retractor Tool Wind Back Cube Calliper Adaptor Brake Depressor Tool Silver
£8.69- Durable: Our Car Rear Disc Brake Piston Retractor Tool is made of carbon steel, which is very durable. Good quality can not only provide more safety for your life, but also extend the life of the product with good materials. This cube tool rotates piston back into brake calipers when replacing brake pads on vehicle with rear wheel disc brakes. Professionally manufactured, high precision with great performance.
- Notice for Use: Our Car Rear Disc Brake Piston Retractor Tool is used with 3/8 "drive ratchet and extension. When replacing the brake pad on the vehicle with the rear wheel disc brake, this cube tool rotates the piston back to the brake caliper. Fit most domestic and some import applications.
Beelooom
Beelooom 3-Piece Hydraulic Cylinder Piston Rod Sealing U-Cup Easy to Operate Professional Tool
£16.40 (£37.49 / kg)- Including 3 sizes, covering almost any rod sealing installation work above 0.87 inch.
- Quick and safe installation tool for flexible rod seal.
Supvox
SUPVOX power supply compression brake pads spreader adjustment group brake pad piston tool feet brake accessory Pump repair tools small brake piston tool small Accessories brake
£9.69- Small brake pad tool: whether you're working on cars or light trucks, the brake piston compressor tool seamlessly fits a wide range of vehicles.
- Brake pad piston tool: the built-in knob offers a comfortable grip, ensuring that you can use the brake pad spreader for extended periods of time without experiencing discomfort or fatigue.
Acouto
Rustproof Steel Car Ratchet Brake Piston Spreader, Black Thicker Braking Device with 2 Clamp Pieces, Ergonomic Handle, 360° Ratchet Swing, Easy to Use, Durable
£19.42- [Convenient size] The compact size of this brake piston tool allows for easy storage and portability. It measures approximately 270mm in overall length, with a small wrench size of 230mm and a palm size of 115x60mm.
- [Versatile application] Perfect for brake tools and brake cylinder adjustment groups, this ratchet brake piston spreader is a musthave for DIY enthusiasts, mechanics, and car owners. It fits a wide range of brake piston sizes.
Yctze
Motorcycle Brake Piston Removal Pliers Ergonomic Hand Tool for Motorbike Repair
£13.80- [Ergonomic design]: With its user-friendly design, these brake piston removal pliers are easy to operate, saving you time and energy. Their high work efficiency makes motorcycle repair a breeze.
- [Versatile tool]: These brake piston removal pliers are ideal for motorbike enthusiasts and professionals alike. They are a must-have for any motorbike repair toolkit, making the brake caliper piston removal process seamless.
Ywbl-wh
20° Gear Cutter, 8Pcs Gear Cutter, High Speed Steel Cutting Tool Industrial Supplies M1.5 20 5mm 6mm for Milling Gears, Square Nose End Mills
£89.42- There are a total of 8 sets of gear cutting tools to suit different numbers of teeth.
- This gear milling cutter is a special cutting tool specially designed for milling gears. Can be used with peace of mind
No Brand
1pcs 100 * 0.5 * 40Z HSS Battery Special for Plate Cutting Gear Cutters
£7.90- Outside Dia: 100mm
- Inner Bore: 25mm
Sourcing Map
sourcing map 63Pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Motor Robot Various Gear Axle Belt Bushings
£9.49- The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy robots/motors.
- Multi-uses, you can use it to fix the broken part,Great for diy science and small production, product design and mechanical model.
Agatige
8PCS Involute Gear Milling Cutter Set, Milling Cutter Gear Cutting Tools, Inside Bore Diameter 22mm Gear Cutting
£74.29- Superior material: It is made of high-speed steel material, with high hardness, rust-proof and not easy to oxidize, strong and durable, and long service life.
- Special tools: Gear milling cutters are specially designed for tooth milling. Milling cutters can adapt to different numbers of teeth, basically meeting your needs.
Wanromjun
8Pcs Involute Gear Cutters Set, High Speed Steel Cutting Tools, 14.5 Pressure Angle, Milling Machine High Speed Steel Disk-Shaped (14.5° 55mm 22mm)
£84.29- Material: Using high speed steel materials, strong and durable, has a long service life
- Specification: The outer diameter is 55mm, the inner diameter is 22mm and the pressure angle is 14.5°
Kelfeeao
Involute Gear Milling Cutter High Speed Steel Fine Punching, Milling Cutter Gear Cutting Tools with Large Cut out Design
£20.59- High Hardness: High temperature quenching heat treatment strengthens the overall hardness, making it more comfortable to use.
- Smooth Installation: The milling cutter is integrally formed without burrs, has smooth surfaces, smooth installation and easy installation.
Agatige
2Pcs Milling Cutter, Tungsten Steel 4 Flutes CNC Router Bits Woodworking Cutting Tools 4 x 75 x 4T
£10.69- Excellent Performance: The flat-bottom milling cutter adopts ultra-fine grained cemented carbide material, which has good milling and cutting performance.
- Efficient: The cutting edge is sharping and the surface is free of burrs, the ultra‑fine cemented carbide material can ensure its engraving and milling performance.
Hhip
HHIP 2041-2051 20P #5 14.5 Degree Gear Cutter
£32.75- Cutter diameter is 2-3/8"; Arbor hole is 1"
- For spur gears with 14.5 degrees & 20 degrees
Hhip
HHIP 2041-4883 48P #8 14.5 Degree Gear Cutter
£27.60- Cutter diameter is 1-3/4"; Arbor hole is 7/8"
- For spur gears with 14.5 degrees & 20 degrees
Wekow
WEKOW 1pcs Module 1.25 PA20#1-8 HSS Bore 22mm Involute Gear Milling Cutter (#5)
£22.68- M1.25 HSS gear milling cutter.
- Specialty cutting tools designed for milling gears.
Ywbl-wh
20° Gear Cutter, 8Pcs Gear Cutter, High Speed Steel Cutting Tool Industrial Supplies M1.5 20 5mm 6mm for Milling Gears, Square Nose End Mills
£89.42- There are a total of 8 sets of gear cutting tools to suit different numbers of teeth.
- This gear milling cutter is a special cutting tool specially designed for milling gears. Can be used with peace of mind
No Brand
1pcs 100 * 0.5 * 40Z HSS Battery Special for Plate Cutting Gear Cutters
£7.90- Outside Dia: 100mm
- Inner Bore: 25mm
Sourcing Map
sourcing map 63Pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Motor Robot Various Gear Axle Belt Bushings
£9.49- The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy robots/motors.
- Multi-uses, you can use it to fix the broken part,Great for diy science and small production, product design and mechanical model.
Agatige
8PCS Involute Gear Milling Cutter Set, Milling Cutter Gear Cutting Tools, Inside Bore Diameter 22mm Gear Cutting
£74.29- Superior material: It is made of high-speed steel material, with high hardness, rust-proof and not easy to oxidize, strong and durable, and long service life.
- Special tools: Gear milling cutters are specially designed for tooth milling. Milling cutters can adapt to different numbers of teeth, basically meeting your needs.
Wanromjun
8Pcs Involute Gear Cutters Set, High Speed Steel Cutting Tools, 14.5 Pressure Angle, Milling Machine High Speed Steel Disk-Shaped (14.5° 55mm 22mm)
£84.29- Material: Using high speed steel materials, strong and durable, has a long service life
- Specification: The outer diameter is 55mm, the inner diameter is 22mm and the pressure angle is 14.5°
Kelfeeao
Involute Gear Milling Cutter High Speed Steel Fine Punching, Milling Cutter Gear Cutting Tools with Large Cut out Design
£20.59- High Hardness: High temperature quenching heat treatment strengthens the overall hardness, making it more comfortable to use.
- Smooth Installation: The milling cutter is integrally formed without burrs, has smooth surfaces, smooth installation and easy installation.
Agatige
2Pcs Milling Cutter, Tungsten Steel 4 Flutes CNC Router Bits Woodworking Cutting Tools 4 x 75 x 4T
£10.69- Excellent Performance: The flat-bottom milling cutter adopts ultra-fine grained cemented carbide material, which has good milling and cutting performance.
- Efficient: The cutting edge is sharping and the surface is free of burrs, the ultra‑fine cemented carbide material can ensure its engraving and milling performance.
Hhip
HHIP 2041-2051 20P #5 14.5 Degree Gear Cutter
£32.75- Cutter diameter is 2-3/8"; Arbor hole is 1"
- For spur gears with 14.5 degrees & 20 degrees
Hhip
HHIP 2041-4883 48P #8 14.5 Degree Gear Cutter
£27.60- Cutter diameter is 1-3/4"; Arbor hole is 7/8"
- For spur gears with 14.5 degrees & 20 degrees
Wekow
WEKOW 1pcs Module 1.25 PA20#1-8 HSS Bore 22mm Involute Gear Milling Cutter (#5)
£22.68- M1.25 HSS gear milling cutter.
- Specialty cutting tools designed for milling gears.
Idex
Idex Super Flangeless™ Nut, Standard Knurl, Natural PEEK, 1/8" OD Tubing, 1/4-28 Flat Bottom; 10/PK
£61.00- Super Flangeless nuts combined with ferrules are an excellent choice for tubing assemblies and will stay tight even through vibration. Ferrules come with lock ring to hold the ferrule in place, preventing the nuts from sliding off in tubing assemblies. The lock ring also allows tightening without twisting the tubing. Pressure rating of nut depends on ferrule used.
- Eliminates tubing twist that can loosen connections Resistant to loosening through vibration
Idex
Idex Flangeless Male Nut, Standard Knurl, Black Acetal, 1/8 inch OD Tubing, 1/4-28 Flat-Bottom; 10/Pk
£22.64- Eliminate the need to flange tubing
- Removable and reusable—saving you money!
Idex
Idex Low-Pressure Union Assembly, Bulkhead, Natural PEEK, 0.020" Bore, 10-32 Coned; 1/EA
£40.11- Use bulkhead unions in a variety of low-pressure situations throughout your fluidic system. Each PEEK union has unique 3/8-24 external threads and can be held in place with included stainless steel nuts and lock washers. Requires 3/8" hole to mount. Assemblies include nut and washer. Recommended torque limit is 15 in-lb (1.7 N.m).
- Thread through the equipment housing to connect the external system to tubing
Kinesis
Kinesis TELOS Phase Separator, 6 mL, 100/pk
£42.59- Quickly and easily separate aqueous and chlorinated solvents
- Gravity flow filtration process, no vacuum required
Idex
Idex Flangeless Male Nut, Standard Head, Natural PEEK, 1/16" OD Tubing, 1/4-28 Flat-Bottom; 10/PK
£49.55- Short head is ideal for tight-space applications
- Eliminate the need to flange tubing
Idex
Idex Conical Adapter, Natural PEEK/ETFE, 0.020" Bore, 1/16" OD Rigid x 0.020-0.030" ID Soft Tubing; 1/EA
£48.57- Accepts two single-wide heating blocks or one double-wide flexi blockDigital control up to 200 degrees C120 VAC operation3 year warranty
- Conical adapters comprise of a female nut and Super Flangeless ferrule system to hold the rigid tubing in place Use to connect 1/16 inch OD rigid tubing to 0020 inch – 0030 inch ID soft tubing 0020 inch bore diameter Natural PEnvironmental ExpressK nut, yellow ETFE ferrule, SS lock ring, and natural ETFE adapter
Idex
Idex 02014-97 Flangeless Fitting, Short Head, Natural PEEK, 1/16" OD Tubing, 1/4-28 Flat-Bottom 10/PK
£90.02- Eliminate the need to flange tubing
- Removable and reusable—saving you money!
Idex
Idex SealTight Fitting, 1/4" Hex, Black PEEK, 1/16" OD Tubing, 10-32 Coned, 10/PK
£84.23- Hex head, 1/PK
- Fingertight coned fittings can withstand up to 9000 psi.
Idex
Idex NanoTight Fitting, Headless, Short, Natural PEEK/ETFE, Max 0.063" Hole, 1/16" OD Tubing, 10-32 Coned, 10/PK
£81.90- 1/32" OD x 15 µm ID x 5 cm L
- 1 month warranty
Diba
Diba Omnifit High Flow Bubble Trap, PVC, 10 µm PTFE filter, 1/ea
£100.46- Remove bubbles with or without vacuum assistance
- Constructed with durable PTFE membrane