Goofit 39mm bore
1-6 of 240 results
Ywbl-wh
20° Gear Cutter, 8Pcs Gear Cutter, High Speed Steel Cutting Tool Industrial Supplies M1.5 20 5mm 6mm for Milling Gears, Square Nose End Mills
£89.42- There are a total of 8 sets of gear cutting tools to suit different numbers of teeth.
- This gear milling cutter is a special cutting tool specially designed for milling gears. Can be used with peace of mind
No Brand
1pcs 100 * 0.5 * 40Z HSS Battery Special for Plate Cutting Gear Cutters
£7.90- Outside Dia: 100mm
- Inner Bore: 25mm
Sourcing Map
sourcing map 63Pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Motor Robot Various Gear Axle Belt Bushings
£9.49- The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy robots/motors.
- Multi-uses, you can use it to fix the broken part,Great for diy science and small production, product design and mechanical model.
Agatige
8PCS Involute Gear Milling Cutter Set, Milling Cutter Gear Cutting Tools, Inside Bore Diameter 22mm Gear Cutting
£74.29- Superior material: It is made of high-speed steel material, with high hardness, rust-proof and not easy to oxidize, strong and durable, and long service life.
- Special tools: Gear milling cutters are specially designed for tooth milling. Milling cutters can adapt to different numbers of teeth, basically meeting your needs.
Wanromjun
8Pcs Involute Gear Cutters Set, High Speed Steel Cutting Tools, 14.5 Pressure Angle, Milling Machine High Speed Steel Disk-Shaped (14.5° 55mm 22mm)
£84.29- Material: Using high speed steel materials, strong and durable, has a long service life
- Specification: The outer diameter is 55mm, the inner diameter is 22mm and the pressure angle is 14.5°
Kelfeeao
Involute Gear Milling Cutter High Speed Steel Fine Punching, Milling Cutter Gear Cutting Tools with Large Cut out Design
£20.59- High Hardness: High temperature quenching heat treatment strengthens the overall hardness, making it more comfortable to use.
- Smooth Installation: The milling cutter is integrally formed without burrs, has smooth surfaces, smooth installation and easy installation.
Agatige
2Pcs Milling Cutter, Tungsten Steel 4 Flutes CNC Router Bits Woodworking Cutting Tools 4 x 75 x 4T
£10.69- Excellent Performance: The flat-bottom milling cutter adopts ultra-fine grained cemented carbide material, which has good milling and cutting performance.
- Efficient: The cutting edge is sharping and the surface is free of burrs, the ultra‑fine cemented carbide material can ensure its engraving and milling performance.
Hhip
HHIP 2041-2051 20P #5 14.5 Degree Gear Cutter
£32.75- Cutter diameter is 2-3/8"; Arbor hole is 1"
- For spur gears with 14.5 degrees & 20 degrees
Hhip
HHIP 2041-4883 48P #8 14.5 Degree Gear Cutter
£27.60- Cutter diameter is 1-3/4"; Arbor hole is 7/8"
- For spur gears with 14.5 degrees & 20 degrees
Wekow
WEKOW 1pcs Module 1.25 PA20#1-8 HSS Bore 22mm Involute Gear Milling Cutter (#5)
£22.68- M1.25 HSS gear milling cutter.
- Specialty cutting tools designed for milling gears.
Ywbl-wh
20° Gear Cutter, 8Pcs Gear Cutter, High Speed Steel Cutting Tool Industrial Supplies M1.5 20 5mm 6mm for Milling Gears, Square Nose End Mills
£89.42- There are a total of 8 sets of gear cutting tools to suit different numbers of teeth.
- This gear milling cutter is a special cutting tool specially designed for milling gears. Can be used with peace of mind
No Brand
1pcs 100 * 0.5 * 40Z HSS Battery Special for Plate Cutting Gear Cutters
£7.90- Outside Dia: 100mm
- Inner Bore: 25mm
Sourcing Map
sourcing map 63Pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Motor Robot Various Gear Axle Belt Bushings
£9.49- The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy robots/motors.
- Multi-uses, you can use it to fix the broken part,Great for diy science and small production, product design and mechanical model.
Agatige
8PCS Involute Gear Milling Cutter Set, Milling Cutter Gear Cutting Tools, Inside Bore Diameter 22mm Gear Cutting
£74.29- Superior material: It is made of high-speed steel material, with high hardness, rust-proof and not easy to oxidize, strong and durable, and long service life.
- Special tools: Gear milling cutters are specially designed for tooth milling. Milling cutters can adapt to different numbers of teeth, basically meeting your needs.
Wanromjun
8Pcs Involute Gear Cutters Set, High Speed Steel Cutting Tools, 14.5 Pressure Angle, Milling Machine High Speed Steel Disk-Shaped (14.5° 55mm 22mm)
£84.29- Material: Using high speed steel materials, strong and durable, has a long service life
- Specification: The outer diameter is 55mm, the inner diameter is 22mm and the pressure angle is 14.5°
Kelfeeao
Involute Gear Milling Cutter High Speed Steel Fine Punching, Milling Cutter Gear Cutting Tools with Large Cut out Design
£20.59- High Hardness: High temperature quenching heat treatment strengthens the overall hardness, making it more comfortable to use.
- Smooth Installation: The milling cutter is integrally formed without burrs, has smooth surfaces, smooth installation and easy installation.
Agatige
2Pcs Milling Cutter, Tungsten Steel 4 Flutes CNC Router Bits Woodworking Cutting Tools 4 x 75 x 4T
£10.69- Excellent Performance: The flat-bottom milling cutter adopts ultra-fine grained cemented carbide material, which has good milling and cutting performance.
- Efficient: The cutting edge is sharping and the surface is free of burrs, the ultra‑fine cemented carbide material can ensure its engraving and milling performance.
Hhip
HHIP 2041-2051 20P #5 14.5 Degree Gear Cutter
£32.75- Cutter diameter is 2-3/8"; Arbor hole is 1"
- For spur gears with 14.5 degrees & 20 degrees
Hhip
HHIP 2041-4883 48P #8 14.5 Degree Gear Cutter
£27.60- Cutter diameter is 1-3/4"; Arbor hole is 7/8"
- For spur gears with 14.5 degrees & 20 degrees
Wekow
WEKOW 1pcs Module 1.25 PA20#1-8 HSS Bore 22mm Involute Gear Milling Cutter (#5)
£22.68- M1.25 HSS gear milling cutter.
- Specialty cutting tools designed for milling gears.
Idex
Idex Super Flangeless™ Nut, Standard Knurl, Natural PEEK, 1/8" OD Tubing, 1/4-28 Flat Bottom; 10/PK
£61.00- Super Flangeless nuts combined with ferrules are an excellent choice for tubing assemblies and will stay tight even through vibration. Ferrules come with lock ring to hold the ferrule in place, preventing the nuts from sliding off in tubing assemblies. The lock ring also allows tightening without twisting the tubing. Pressure rating of nut depends on ferrule used.
- Eliminates tubing twist that can loosen connections Resistant to loosening through vibration
Idex
Idex Flangeless Male Nut, Standard Knurl, Black Acetal, 1/8 inch OD Tubing, 1/4-28 Flat-Bottom; 10/Pk
£22.64- Eliminate the need to flange tubing
- Removable and reusable—saving you money!
Idex
Idex Low-Pressure Union Assembly, Bulkhead, Natural PEEK, 0.020" Bore, 10-32 Coned; 1/EA
£40.11- Use bulkhead unions in a variety of low-pressure situations throughout your fluidic system. Each PEEK union has unique 3/8-24 external threads and can be held in place with included stainless steel nuts and lock washers. Requires 3/8" hole to mount. Assemblies include nut and washer. Recommended torque limit is 15 in-lb (1.7 N.m).
- Thread through the equipment housing to connect the external system to tubing
Kinesis
Kinesis TELOS Phase Separator, 6 mL, 100/pk
£42.59- Quickly and easily separate aqueous and chlorinated solvents
- Gravity flow filtration process, no vacuum required
Idex
Idex Flangeless Male Nut, Standard Head, Natural PEEK, 1/16" OD Tubing, 1/4-28 Flat-Bottom; 10/PK
£49.55- Short head is ideal for tight-space applications
- Eliminate the need to flange tubing
Idex
Idex Conical Adapter, Natural PEEK/ETFE, 0.020" Bore, 1/16" OD Rigid x 0.020-0.030" ID Soft Tubing; 1/EA
£48.57- Accepts two single-wide heating blocks or one double-wide flexi blockDigital control up to 200 degrees C120 VAC operation3 year warranty
- Conical adapters comprise of a female nut and Super Flangeless ferrule system to hold the rigid tubing in place Use to connect 1/16 inch OD rigid tubing to 0020 inch – 0030 inch ID soft tubing 0020 inch bore diameter Natural PEnvironmental ExpressK nut, yellow ETFE ferrule, SS lock ring, and natural ETFE adapter
Idex
Idex 02014-97 Flangeless Fitting, Short Head, Natural PEEK, 1/16" OD Tubing, 1/4-28 Flat-Bottom 10/PK
£90.02- Eliminate the need to flange tubing
- Removable and reusable—saving you money!
Idex
Idex SealTight Fitting, 1/4" Hex, Black PEEK, 1/16" OD Tubing, 10-32 Coned, 10/PK
£84.23- Hex head, 1/PK
- Fingertight coned fittings can withstand up to 9000 psi.
Idex
Idex NanoTight Fitting, Headless, Short, Natural PEEK/ETFE, Max 0.063" Hole, 1/16" OD Tubing, 10-32 Coned, 10/PK
£81.90- 1/32" OD x 15 µm ID x 5 cm L
- 1 month warranty
Diba
Diba Omnifit High Flow Bubble Trap, PVC, 10 µm PTFE filter, 1/ea
£100.46- Remove bubbles with or without vacuum assistance
- Constructed with durable PTFE membrane
Idex
Idex Super Flangeless™ Nut, Standard Knurl, Natural PEEK, 1/8" OD Tubing, 1/4-28 Flat Bottom; 10/PK
£61.00- Super Flangeless nuts combined with ferrules are an excellent choice for tubing assemblies and will stay tight even through vibration. Ferrules come with lock ring to hold the ferrule in place, preventing the nuts from sliding off in tubing assemblies. The lock ring also allows tightening without twisting the tubing. Pressure rating of nut depends on ferrule used.
- Eliminates tubing twist that can loosen connections Resistant to loosening through vibration
Idex
Idex Flangeless Male Nut, Standard Knurl, Black Acetal, 1/8 inch OD Tubing, 1/4-28 Flat-Bottom; 10/Pk
£22.64- Eliminate the need to flange tubing
- Removable and reusable—saving you money!
Idex
Idex Low-Pressure Union Assembly, Bulkhead, Natural PEEK, 0.020" Bore, 10-32 Coned; 1/EA
£40.11- Use bulkhead unions in a variety of low-pressure situations throughout your fluidic system. Each PEEK union has unique 3/8-24 external threads and can be held in place with included stainless steel nuts and lock washers. Requires 3/8" hole to mount. Assemblies include nut and washer. Recommended torque limit is 15 in-lb (1.7 N.m).
- Thread through the equipment housing to connect the external system to tubing
Kinesis
Kinesis TELOS Phase Separator, 6 mL, 100/pk
£42.59- Quickly and easily separate aqueous and chlorinated solvents
- Gravity flow filtration process, no vacuum required
Idex
Idex Flangeless Male Nut, Standard Head, Natural PEEK, 1/16" OD Tubing, 1/4-28 Flat-Bottom; 10/PK
£49.55- Short head is ideal for tight-space applications
- Eliminate the need to flange tubing
Idex
Idex Conical Adapter, Natural PEEK/ETFE, 0.020" Bore, 1/16" OD Rigid x 0.020-0.030" ID Soft Tubing; 1/EA
£48.57- Accepts two single-wide heating blocks or one double-wide flexi blockDigital control up to 200 degrees C120 VAC operation3 year warranty
- Conical adapters comprise of a female nut and Super Flangeless ferrule system to hold the rigid tubing in place Use to connect 1/16 inch OD rigid tubing to 0020 inch – 0030 inch ID soft tubing 0020 inch bore diameter Natural PEnvironmental ExpressK nut, yellow ETFE ferrule, SS lock ring, and natural ETFE adapter
Idex
Idex 02014-97 Flangeless Fitting, Short Head, Natural PEEK, 1/16" OD Tubing, 1/4-28 Flat-Bottom 10/PK
£90.02- Eliminate the need to flange tubing
- Removable and reusable—saving you money!
Idex
Idex SealTight Fitting, 1/4" Hex, Black PEEK, 1/16" OD Tubing, 10-32 Coned, 10/PK
£84.23- Hex head, 1/PK
- Fingertight coned fittings can withstand up to 9000 psi.
Idex
Idex NanoTight Fitting, Headless, Short, Natural PEEK/ETFE, Max 0.063" Hole, 1/16" OD Tubing, 10-32 Coned, 10/PK
£81.90- 1/32" OD x 15 µm ID x 5 cm L
- 1 month warranty
Diba
Diba Omnifit High Flow Bubble Trap, PVC, 10 µm PTFE filter, 1/ea
£100.46- Remove bubbles with or without vacuum assistance
- Constructed with durable PTFE membrane