Sourcing map ptfe
1-6 of 240 results

sourcing map Metal Hooks Window Curtain Drapery Clips 20 Pcs Silver Tone

• 20 Pcs Silver Tone Metal Hooks Window Curtain Drapery Clips
• Brand new with high quality

Water & Wood Home Table Foot Reduce Noise Hemispherical 8mm x 2.5mm Rubber Pads Clear

• Home Table Foot Reduce Noise Hemispherical 8mm x 2.5mm Rubber Pads Clear
• Brand new with high quality

Diary of a Piglin Book 2: Under the Golden Sun (2)

Well-Goal 10pcs M6 Barrel Bolts Cross Dowel Slotted Furniture Nut for Beds Crib Chairs

• 10pcs M6 Barrel Bolts Cross Dowel Slotted Furniture Nut for Beds Crib Chairs
• New item with high quality

Feng Shui: The Key Concepts

Herobrine's Hunters Book 2: As Tensions Rise, Who Can Be Trusted?

Herobrine's Hunters Book 3: Into The Caves They Go... But Will They Come Back Out?

Diary of a Librarian Book 3: Making Up For Lost Time

Herobrine's Hunters Book 5: Lakely Is Frozen... Who Can Help Her?

Herobrine's Hunters Book 1: Herobrine's Rising...Who Will Stop Him

sourcing map 8233 Car Ignition Distributor Cap and Rotor Kit Replacement DC 12V

• Product Name: Distributor Cap and Rotor Kit; Material: Plastic,Metal; Package Content: 1 x Distributor Cap and Rotor Kit
• Good materials, offering the quality, reliability, and durability, which promote longer product life.

Distributor Cap Black

• Black Distributor Cap - Compatible with Bosch System
• OE Retro Look Suitable for

Distributor Cap for Lucas 45D Distributor Top Entry Cap

• Top entry cap for Lucas 43D, 45D & 59D
• Top entry cap for push in HT leads

Intermotor 45550 Distributor Cap

• 2 Year warranty
• Fully Tested

Black Rover V8 Lucas 35D Distributor Cap DDB107 & Red Rotor Arm

• Black V8 distributor cap
• Powermax red rotor arm

Blue Print ADN114229 Ignition Distributor Cap, pack of one

• Original Blue Print spare part - Right First Time
• Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!

Blue Print ADT314235 Ignition Distributor Cap, pack of one

• Original Blue Print spare part - Right First Time
• Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!

Intermotor 46530 Distributor Cap

• This product is covered by a full OE Quality Warranty
• This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with.

APUK Ignition Distributor Condenser Ferguson Tractor TEA TED TE20 Lucas DCB121

• 12 volt

X AUTOHAUX No.1104050 Car Ignition Distributor Cap and Rotor Kit for Chevrolet

• Fitment: for Chevrolet Astro 4.3L 1996-2005, for Chevrolet Beretta 3.1L 1996, for Chevrolet Beretta 2.2L 2190CC 1996, for Chevrolet Blazer 4.3L 1996-2005, for Oldsmobile Bravada 4.3L 1996-2001, for Chevrolet C1500 4.3L 1996-1998, for GMC C1500 4.3L 1996-1998, for Chevrolet Cavalier 2.4L 2392CC 1996, for Chevrolet Cavalier 2.2L 2190CC 1996, for Chevrolet Corsica 3.1L 1996.
• OE Number:1104050/1103976/1104057/12570426.

20° Gear Cutter, 8Pcs Gear Cutter, High Speed Steel Cutting Tool Industrial Supplies M1.5 20 5mm 6mm for Milling Gears, Square Nose End Mills

• There are a total of 8 sets of gear cutting tools to suit different numbers of teeth.
• This gear milling cutter is a special cutting tool specially designed for milling gears. Can be used with peace of mind

1pcs 100 * 0.5 * 40Z HSS Battery Special for Plate Cutting Gear Cutters

• Outside Dia: 100mm
• Inner Bore: 25mm

sourcing map 63Pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Motor Robot Various Gear Axle Belt Bushings

• The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy robots/motors.
• Multi-uses, you can use it to fix the broken part,Great for diy science and small production, product design and mechanical model.

8PCS Involute Gear Milling Cutter Set, Milling Cutter Gear Cutting Tools, Inside Bore Diameter 22mm Gear Cutting

• Superior material: It is made of high-speed steel material, with high hardness, rust-proof and not easy to oxidize, strong and durable, and long service life.
• Special tools: Gear milling cutters are specially designed for tooth milling. Milling cutters can adapt to different numbers of teeth, basically meeting your needs.

8Pcs Involute Gear Cutters Set, High Speed Steel Cutting Tools, 14.5 Pressure Angle, Milling Machine High Speed Steel Disk-Shaped (14.5° 55mm 22mm)

• Material: Using high speed steel materials, strong and durable, has a long service life
• Specification: The outer diameter is 55mm, the inner diameter is 22mm and the pressure angle is 14.5°

Involute Gear Milling Cutter High Speed Steel Fine Punching, Milling Cutter Gear Cutting Tools with Large Cut out Design

• High Hardness: High temperature quenching heat treatment strengthens the overall hardness, making it more comfortable to use.
• Smooth Installation: The milling cutter is integrally formed without burrs, has smooth surfaces, smooth installation and easy installation.

2Pcs Milling Cutter, Tungsten Steel 4 Flutes CNC Router Bits Woodworking Cutting Tools 4 x 75 x 4T

• Excellent Performance: The flat-bottom milling cutter adopts ultra-fine grained cemented carbide material, which has good milling and cutting performance.
• Efficient: The cutting edge is sharping and the surface is free of burrs, the ultra‑fine cemented carbide material can ensure its engraving and milling performance.

HHIP 2041-2051 20P #5 14.5 Degree Gear Cutter

• Cutter diameter is 2-3/8"; Arbor hole is 1"
• For spur gears with 14.5 degrees & 20 degrees

HHIP 2041-4883 48P #8 14.5 Degree Gear Cutter

• Cutter diameter is 1-3/4"; Arbor hole is 7/8"
• For spur gears with 14.5 degrees & 20 degrees

WEKOW 1pcs Module 1.25 PA20#1-8 HSS Bore 22mm Involute Gear Milling Cutter (#5)

• M1.25 HSS gear milling cutter.
• Specialty cutting tools designed for milling gears.

Idex Super Flangeless™ Nut, Standard Knurl, Natural PEEK, 1/8" OD Tubing, 1/4-28 Flat Bottom; 10/PK

• Super Flangeless nuts combined with ferrules are an excellent choice for tubing assemblies and will stay tight even through vibration. Ferrules come with lock ring to hold the ferrule in place, preventing the nuts from sliding off in tubing assemblies. The lock ring also allows tightening without twisting the tubing. Pressure rating of nut depends on ferrule used.
• Eliminates tubing twist that can loosen connections Resistant to loosening through vibration

Idex Flangeless Male Nut, Standard Knurl, Black Acetal, 1/8 inch OD Tubing, 1/4-28 Flat-Bottom; 10/Pk

• Eliminate the need to flange tubing
• Removable and reusable—saving you money!

Idex Low-Pressure Union Assembly, Bulkhead, Natural PEEK, 0.020" Bore, 10-32 Coned; 1/EA

• Use bulkhead unions in a variety of low-pressure situations throughout your fluidic system. Each PEEK union has unique 3/8-24 external threads and can be held in place with included stainless steel nuts and lock washers. Requires 3/8" hole to mount. Assemblies include nut and washer. Recommended torque limit is 15 in-lb (1.7 N.m).
• Thread through the equipment housing to connect the external system to tubing

Kinesis TELOS Phase Separator, 6 mL, 100/pk

• Quickly and easily separate aqueous and chlorinated solvents
• Gravity flow filtration process, no vacuum required

Idex Flangeless Male Nut, Standard Head, Natural PEEK, 1/16" OD Tubing, 1/4-28 Flat-Bottom; 10/PK

• Short head is ideal for tight-space applications
• Eliminate the need to flange tubing

Idex Conical Adapter, Natural PEEK/ETFE, 0.020" Bore, 1/16" OD Rigid x 0.020-0.030" ID Soft Tubing; 1/EA

• Accepts two single-wide heating blocks or one double-wide flexi blockDigital control up to 200 degrees C120 VAC operation3 year warranty
• Conical adapters comprise of a female nut and Super Flangeless ferrule system to hold the rigid tubing in place Use to connect 1/16 inch OD rigid tubing to 0020 inch – 0030 inch ID soft tubing 0020 inch bore diameter Natural PEnvironmental ExpressK nut, yellow ETFE ferrule, SS lock ring, and natural ETFE adapter

Idex 02014-97 Flangeless Fitting, Short Head, Natural PEEK, 1/16" OD Tubing, 1/4-28 Flat-Bottom 10/PK

• Eliminate the need to flange tubing
• Removable and reusable—saving you money!

Idex SealTight Fitting, 1/4" Hex, Black PEEK, 1/16" OD Tubing, 10-32 Coned, 10/PK

• Hex head, 1/PK
• Fingertight coned fittings can withstand up to 9000 psi.

Idex NanoTight Fitting, Headless, Short, Natural PEEK/ETFE, Max 0.063" Hole, 1/16" OD Tubing, 10-32 Coned, 10/PK

• 1/32" OD x 15 µm ID x 5 cm L
• 1 month warranty

Diba Omnifit High Flow Bubble Trap, PVC, 10 µm PTFE filter, 1/ea

• Remove bubbles with or without vacuum assistance
• Constructed with durable PTFE membrane