The Intel BE200 Wi-Fi 7 network card features a 2*2 antenna configuration, supporting 2.4GHz, 5GHz, and 6GHz frequency bands, and boasts a maximum network speed of 5.8Gbps.
The biggest technical highlight of WiFi 7 is the support for 320MHz channel, which is a channel that has never been used by past home routers.
The Intel BE200 Wi-Fi 7 network card features a 2*2 antenna configuration, supporting 2.4GHz, 5GHz, and 6GHz frequency bands, and boasts a maximum network speed of 5.8Gbps.
The biggest technical highlight of WiFi 7 is the support for 320MHz channel, which is a channel that has never been used by past home routers.
APPLICATION: Convert M.2 E Key or A E Key module (e.g. WiFi, or Dual Band Wireless module, etc.) for use on computers with M Key M.2 socket, this adapter is suitable for Intel AX200/AX201/AX210/8260/8265/9260.
OPERATING SYSTEM SUPPORT: No driver installation required, OS transparent hardware bridge converter, supports for Windows, for OS X and for Linux.
IT MANAGEMENT: Intel vPro for remote management and troubleshooting; PXE boot enabled for centralized OS deployment and updates; 9K jumbo frame for reduced packet overhead; Remote system boot via WoL; VLAN support for efficient network management
SUPPORT OS: M.2 NGFF A+E to PCIE 1X adapter supports for Windows XP/7/8/10, for WinCE, for Linux and any other OS.
PCB MATERIAL: The M.2 A+E PCIE 1X adapter is made of PCB material, which will not be deformed during long time usage, thus ensuring long term stability.
This WiFi and Bluetooth module supports dual-stream Wi-Fi in 2.4GHz, 5GHz and 6GHz, as well as Bluetooth 5.42. These new features maximize the benefits of Wi-Fi 7, with speeds of up to 5 gigabits!.
For 1x PCIe port (fits 1x, 2x, 4x, 8x and 16x ports). cOMPATIBLE Windows 11, Windows 10, Linux;
Nice Transfer Rate: Built in SPP,PS2,EPP or ECP, compatible IEEE1284 printing protocol, transfer rate up to 1.5 Mbytes/sec, built in 16 byte FIFO. Plug and play, automatic IRQ and 1/0 address assignment. No switch and no jumper, easy to set up with software.
32 Bit Bus Design: 32 bit bus design, supports PCI 2.1 specification, with high speed I/0 controller (16C550C or compatible UART).
The DB25 Single Port Parallel PCIe Card can be installed in a PCIe slot, allowing you to connect SPP/ECP/EPP parallel peripheral to any computer system. Relying on a native single chip design, this adapter harnesses the true capability of PCI Express – ensuring maximum performance and reliability.
Native single-chip, single lane PCI Express,complaint with PCI Express base specification revision 2.0
【Parallel PCI Adapter】: The PCI express parallel card accord with PC- Express1.0a standard. Pci-express's 25/s full duplex channel. You can buy it with confidence.
【Plug and Play】: This parallel port card support plug and play, which is very convenient to use. 1 DB25 print parallel port Interface. SPP.EPP.ECP compatible EEE1284 printer port.
[PC-EXPRESS1.0a COMPATIBILITY] Upgrade your printing experience with our Printer to PCI-E Converter, which perfectly adheres to the PC-Express1.0a standard. Enjoy seamless compatibility and enhanced performance.
[FAST AND FULL DUPLEX CHANNEL] Our product supports a high-speed 25/s full duplex channel, ensuring fast and efficient printing. Experience quick data transfer and improved productivity.
1 PORT PARALLEL PCIe CARD: Using a 1x PCI Express 2.0 Gen 1 slot, add a DB25 parallel communications port to your computer; Installs in full/standard or low profile PCIe cards slots (brackets incl.); Latest version of our popular parallel card PEX1P
TECH SPECS: Parallel port LPT controller card supports SPP/Byte/Nibble/ECP modes | Compatible with IEEE 1284 | Speeds up to 2.5Mbps | Asix AX99100 chip | Full profile bracket pre installed
USB TO PARALLEL: The ICUSB1284 USB to Parallel printer adapter allows you to connect a 36-pin Centronics-equipped parallel printer to a computer via a USB-A 2.0 port
LOW POWER: USB bus-powered operation, no external power adapter required (0.9W consumption, 5V at 0,18A)